|
Air pressure applied to your
choice of reservoir (syringe, cartridge or pressure pot)
forces the material into a chamber where fluid
is carried forward by the turn of the screw. As the screw turns, the
material is eventually brought to the end of the chamber and exits
through a dispense tip or needle. The
IntelliSpense Screw Controller
will both regulate the air
pressure to keep the fluid
feeding the valve and
make it possible to adjust the time needed
to dispense the shot size required.
Screw Valves
work extremely well with greases,
pastes and all manner of filled materials. They can easily be
mounted on an IntelliSpense Robot
or used as a stand-alone work station, with a
stand or a
gun.
To feed any IDS valve, choose
from our dispensing syringes, (to feed
thin to medium materials in very small shots) our
single cartridges, (for medium
to thicker materials in smaller shots or beads) or for large volume
capacity, order one of our
reservoirs (for thin to medium materials) or one of our
pail dispenser units, for thicker
materials.
Auger Servo controlled valves are
controlled by the
IntelliSpense™
Screw Controller.
Features
-
Choose 8,
16, or 32 pitch SS auger
for custom dispensing characteristics.
-
3,5,10,or 30cc/ml syringe barrel holder.
-
Disposable feed tube connects syringe to the
fluid body.
-
Virtually zero dead space within the valve
design.
-
24V DC servo motor drive with optional encoder
provide feedback.
-
Adjustable auger speed and reverse motion for
clean cycle stops
Specifications
-
Motor voltage:
24VDC servo motor
-
maximum inlet fluid pressure:
100
PSI
-
Auger material:
stainless steel
-
Minimum material viscosity:
25,000cps
-
Minimum shot size:
0.020" (0.508mm)
-
Dimensions:
139.70 mm to 69.22 mm x 29.21 mm
-
Weight:
9 oz
(255gm)
Model numbers define pitch of
the Auger and syringe size connected to the valve.
Servo Driven Auger Valve -
specify pitch and syringe size
according to the part numbers shown below:
7060502
Auger Valve - 5cc/ml/8 Pitch - 5cc/ml
7060503
Auger Valve - 5cc/ml/16 Pitch - 5cc/ml
7060504
Auger Valve - 5cc/ml/32 Pitch - 5cc/ml
7060505
Auger Valve - 10cc/ml/8 Pitch - 10cc/ml
7060506
Auger Valve - 10cc/ml/16 Pitch - 10cc/ml
7060507
Auger Valve - 10cc/ml/32 Pitch - 10cc/ml
7060508
Auger Valve - 30cc/ml/8 Pitch - 30cc/ml
7060509
Auger Valve - 30cc/ml/16 Pitch - 30cc/ml
7060510
Auger Valve - 30cc/ml/32 Pitch - 30cc/ml
7060000-SP
Servo Driven Auger Valve Spare Parts Kit
7070000
Auger Valve Controller
Also available in a fully encoded version.
More information here. |
|
